AI PCB design, from a description
Describe the board you need — “a 5V-to-3.3V buck converter with USB-C input” — and Grovec drafts the schematic, lays out the PCB, and checks it with ERC and DRC before you export Gerbers.
Schematic and layout, checked automatically
Grovec authors a real circuit, not a sketch: components, nets, footprints and routing. It runs electrical rule checks (ERC) and design rule checks (DRC) automatically, so connectivity errors and manufacturing-rule violations surface before you spend money on a fab run.
Fab-ready output
Export round-trip-verified Gerber and Excellon files and a pick-and-place (CPL) — the exact package a board house expects. What you export is what gets built, because the export is re-opened and verified against the source.
Part of one design tool
The same Brain that lays out your board can design the enclosure around it, the bracket that holds it, or the robot it controls — with one account and one live bill of materials across all of it.
FAQ
Does it route the board or just draw a schematic?
Both — schematic capture plus component placement and routing, with ERC and DRC run automatically.
Can I send the output straight to a fab?
Yes. Export Gerber, Excellon and pick-and-place files; exports are round-trip-verified so they open correctly at the board house.
What if I need an enclosure too?
Grovec designs the mechanical parts and enclosure in the same tool, so your board and its housing share one model and one BOM.
Is it free to try?
Yes — start free and upgrade when you need more.